Buddy3D Tasting pack PETG

What can you expect?

Buddy3D is a high-quality brand that goes through our strict quality control. The Buddy3D filaments are made in the EU. All filament spools have perfect winding, beautiful colors, and 0.04 mm precision. We pick the colors and materials that are not covered by Prusament and that are hard to be found anywhere else.

Want to know the full story? Learn more about the origin of Buddy3D on our Prusa blog.

About PETG

PETG is one of the most commonly used filaments. Its strength and durability make it an excellent choice for printing various mechanically-stressed parts, such as various holders, or clamps, for example. Due to its excellent layer-to-layer adhesion, PETG prints are ideal for indoor and outdoor waterproof applications. Furthermore, PETG is a tough material with good high-temperature resistance. The G in the acronym stands for a glycol-modified substance that is present during the manufacturing process. It modifies the properties of PET, so that it’s easier to print, less brittle, and clearer when printing with semi-transparent variants. PETG has a low thermal expansion, so even when printing big objects, and without an enclosure, it rarely lifts from the bed and warps. In addition to that, PETG is tougher and less brittle than PLA. It has a healthy amount of flex which can prevent parts from breaking under pressure. We use PETG to print parts for our printers!

Printing Setup

• Nozzle - 250 ±10 °C
• Heatbed - 80 ±10 °C
• Recommended Steel Sheet - Textured / Satin

Check Prusa's material table and print-surface preparation instructions before starting.

Basic Attributes

• Good high-temperature resistance - Worse details than PLA, for example
• Easy to print - Possibility of stringing
• Low shrinking and warping - Poor bridging characteristics
• High strength and durability
• Easier to sand than PLA (softer, less melting)

Beginners tips & tricks

Unlike PLA or ABS, PETG tends to ooze a bit and may leave strings of plastic on your print. We suggest drying the filament before printing, as described here. If stringing still occurs, you may further counter it by increasing retraction and playing with hotend temperature, but if you use our filament presets in Prusa Slicer, we already did that for you and the amount of stringing should be minimal. Or, you can get rid of the strings by briefly blasting your finished prints with a heat gun.

This product includes:

• Buddy3D PETG Black (250g)
• Buddy3D PETG Blue (250g)
• Buddy3D PETG Brown (250g)
• Buddy3D PETG Green (250g)
• Buddy3D PETG Grey (250g)
• Buddy3D PETG Lila (250g)
• Buddy3D PETG Red (250g)
• Buddy3D PETG Silver (250g)
• Buddy3D PETG White (250g)
• Buddy3D PETG Yellow (250g)
• Buddy3D cleaner 25g

Notes

1.75 mm filament is manufactured with precision of ± 0.04 mm

Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.

To dry the filament, please follow the instructions in our article.

Learn more about Buddy3D cleaner here.