HT90 Satin Powder-coated Print Sheet

OVERVIEW:

The Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with a lightly textured matte finish offers an optimal level of adhesion and makes it the most universal print sheet. Unlike the smooth or textured sheet, both PLA and PETG materials can be printed with the right amount of surface adhesion. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate, and more. A vast majority of materials can be printed without a separation layer (e.g., glue).

Find more details about the Satin Powder-coated Print Sheet (including usage and maintenance instructions) in our online help article.

WARNING:

Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time.

ATTRIBUTES

• Suitable for both PLA and PETG - Acetone causes the surface to quickly deteriorate
• Lightly textured surface finish - Prints from ASA, PC Blend require a brim / skirt / shield around the print
• No need for glue stick for PETG - Easy maintenance and good adhesion qualities
• Wide range of supported filaments, including advanced materials, for instance PC Blend
• Easy maintenance and good adhesion qualities

Note:

Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.