Prusament Resin Cleaner DPM 5l

Prusament Resin Cleaner DPM

The Prusament Resin Cleaner DPM is an effective organic solvent made for washing uncured SLA models. It offers low flammability, little volatility and the lowest possible toxicity.

Better in everything

Most people use isopropyl alcohol (IPA) for washing uncured SLA prints. However, the Prusament Resin Cleaner DPM is safer in every way:

• It’s much less flammable. The DPM’s ignition temperature is significantly higher and starting a fire with improper electric installation or other sources of spark is much more difficult.
• It’s much less volatile than IPA. This significantly reduces levels of VOCs present in the air. Plus, you can store it in open canisters for much longer.
• It’s significantly less toxic. Really, it’s as safe as it could be. It doesn’t need any pictograms like IPA.
• You won’t accidentally make any explosives out of it. DPM won’t form any unstable peroxides like isopropyl alcohol does. (learn more)

High efficiency

The Prusament Resin Cleaner DPM lasts multiple cycles before it gets saturated with liquid resin leftovers. We did a thorough testing with CW1S and Prusament Resin and found that 2l of the cleaner works perfectly until saturated with 100ml of liquid resin. Then it gradually loses its efficiency.

Easy to Use

The washing process takes several minutes and doesn’t differ much from washing in IPA:

• Fill the CW1S vat with the cleaner and put the 3D-printed models inside
• Run the washing cycle for 5-15 minutes (time may differ according to the model complexity)
• Wash the model in another vat filled with water after the first washing cycle. You may use water with dish soap for more effective cleaning of the Prusament Resin Cleaner DPM.
• (optional) You may use compressed air to dry the print
• Dry the model in the CW1S before curing (drying temperature and time are specified in the resin technical sheet)

Safety and waste disposal

Before you start using Prusament Resin Cleaner DPM, don’t forget to read the material safety data sheet (MSDS). Here, we sum up only a few tips that might make your life with resin a little easier. ;-) The rules are very similar, if not the same, for every SLA-related chemical you come in contact with. Please keep in mind that while we maintain the lowest possible toxicity of our products, it is highly recommended to protect yourself, as they still might pose a health risk. Use protective equipment, especially rubber gloves and protective eyewear every time you work with SLA technology. Prevent contact with skin, eyes, and mouth. Also, keeping a clean workplace prevents accidents, such as spills. If the Prusament Resin Cleaner DPM gets spilled, clean it immediately with paper towels. Anything contaminated with both liquid resin and DPM is considered a toxic waste, and you should dispose of it accordingly. This includes liquid resin leftovers, cleaner, water, paper towels, used gloves, etc. Such waste cannot be recycled and definitely should not end up in general waste.